If you are having a similar issue that WD My Passport external or internal hard drive not showing up on Mac, you can try the following tips as listed here for help: （Some are similar as shown on this page)
EaseUS partition manager software with its Check File System feature can help. As long as your Disk Management can detect it, you can apply this tool to fix the corrupted file system and bad sectors on WD hard drive.
If the WD drive has already been assigned with a letter, click "Change" to choose another letter for it. After this, restart your PC and check if you can visit the WD external hard drive in Windows File Explorer.
If your WD hard drive shows up and you can access the disk again. Take the last guide in this part to fully protect your files and make the WD external hard drive viable for saving and editing data again.
Option 1 (Recommended): Update drivers automatically - Novice computer users can update drivers using trusted software in just a few clicks. Automatic driver updates are fast, efficient and eliminate all the guesswork. Your old drivers can even be backed up and restored in case any problems occur.
Option 2: Update drivers manually - Find the correct driver for your Hard Disk Drive and operating system, then install it by following the step by step instructions below. You'll need some computer skills to use this method.
The built-in Microsoft Windows Update service may not update your drivers properly. Instead, use The Hard Disk Drive Driver Update Utility for Western Digital. It is intelligent software that automatically recognizes your computer's operating system and hard disk drive manufacturer and model to find the most up-to-date drivers for it. There is no risk of installing the wrong driver. The Hard Disk Drive Driver Update Utility downloads and installs your drivers quickly and easily.
You can scan for driver updates automatically and install them manually with the free version of the Western Digital Hard Disk Drive Driver Update Utility, or complete all necessary driver updates automatically using the premium version.
Click the Update button next to your driver. The correct version will be downloaded and installed automatically. Or, you can click the Update All button at the bottom to automatically download and install the correct version of all the drivers that are missing or out-of-date on your system.
To find the latest driver, including Windows 11 drivers, choose from our list of most popular Western Digital Hard Disk Drive downloads or search our driver archive for the driver that fits your specific Western Digital hard disk drive model and your PC's operating system.
After downloading your driver update, you will need to install it. Driver updates come in a variety of file formats with different file extensions. For example, you may have downloaded an EXE, INF, ZIP, or SYS file. Each file type has a slightly different installation procedure to follow. Visit our Driver Support Page to watch helpful step-by-step videos on how to install drivers based on their file extension.
Summary: This article concludes the three most common reasons why your WD My Passport external hard drive read-only on Mac. Free download iBoysoft NTFS for Mac to solve read-only NTFS-formatted WD hard drive on Mac.
Western Digital is one of the most popular hard drive manufacturers. Its product line covers WD My Passport, WD Easystore, WD My Passport Ultra, WD My Book, WD Elements, WD My Passport for Mac, and more. In the WD Easystore vs. My Passport comparison, WD My Passport external hard drives are the more widely used. You may want to transfer files to WD My Passport from Mac. However, many users complain their WD My Passport is read-only on Mac as the user below in the WD community.
"I have a WD My Passport 320GB external hard drive that I am trying to hook up to my iMac for the first time. I'm running macOS 10.13. I'm extremely frustrated because this drive is in a read-only mode, and I can't figure out how to change it! Any suggestion to fix this?"
Sometimes, the WD external hard drive is read-only on Mac when you just got a brand new WD external hard drive. In other times, it suddenly became read-only after you have been using it for a while. The most common reasons for a read-only WD external hard drive, like WD My Passport, are listed below:
If you are not sure which reason has caused your Mac external hard drive read only, check the scenarios one by one. If you know the reason already, you can jump to the scenario that best describes your situation.
For WD My Passport Ultra and WD Elements, check if the hard drive is formatted with NTFS file system. By default, macOS can read NTFS drive on Mac or drive in read-only mode. You can view the files saved on the NTFS-formatted partition or drive but can't make any changes to them. In addition, the WD My Passport hard drive won't let you add any files to it. To check if your WD My Passport is NTFS formatted, follow the steps:
After having confirmed that the WD My Passport is formatted with NTFS, many people will choose to reformat the WD My Passport hard drive to make the WD external hard drive compatible with Mac. But as you know, directly formatting WD Elements or My Passport on Mac causes data loss.
Note: Can't read and write to your NTFS disk after installing the software? Follow the pop-up to install an NTFS driver by iBoysoft and enable System Extensions. Then, you can read and write to the NTFS volumes.
Besides an NTFS mounter, iBoysoft NTFS for Mac can also open, unmount, eject, erase and repair NTFS volumes. It can list all attached external disks including USB flash drives, sd cards, memory sticks, external hard drives and so on. You can open them with one click. Moreover, you can reformat them to NTFS with iBoysoft NTFS for Mac if you need.
If your WD My Passport external hard drive is not formatted with NTFS but you have no write permission to it, it is probably because you have read-only permission to access the WD My Passport. Since your WD external hard drive is write-protected, all your write access is denied.
If you are sure that the read-only WD My Passport is not caused by the NTFS file system nor read-only permission, another possible cause might be disk corruption. When an external drive is corrupted, people suddenly have trouble reading or/and writing to the disk. Then you will have to fix the corrupted WD My Passport external hard drive to make it writable again. We will introduce two solutions here:
This solution might help you solve the read-only external hard drive problem without formatting. You will utilize a built-in tool on Mac called Disk Utility. It is used to manage internal and external disks on Mac. There is a function called First Aid in Disk Utility that can be used to check for and repair errors on the selected disk or volume.
The external hard drive read-only on Mac problem doesn't happen to WD external hard drives only. Any external hard drive could be write-protected on Mac. It is quite common to see other notable external hard drive brands get the same complaint like Seagate, Samsung, Toshiba, etc. When you come across the read-only disk problem on Mac, the post is always helpful.
There are a lot of factors that could hinder your computer from reading your external hard drive. Some of these factors are: The USB port is having issues, the drive not found in the Disc Management Window, the eternal drive has some problems, or there is a problem with the partitioning and formatting.
There are many ways to fix windows not recognized by an external hard drive. This depends largely on the cause and nature of the problem. The use of a good professional data recovery software like the Recoverit External Hard Drive Recovery Software which solves a wide variety of external hard drive issues.
You can check for the external hard drive in the Disk Management Window by these simple steps. Click on Start. Next, click Run and type diskmgmt.msc in the dialogue box. Once the Disk Management Window is opened, you can now search for the external disk if it is hidden as a result of partition error.
When your Mac fails to read your Seagate external hard drive, you are most likely facing one or more of the following issues: macOS update issues, the file system is corrupt, virus attack, you have a bad port, you are having motherboard problems, the external link is damaged or corrupt, among other causes.
Have you ever met the above-described scenario before? While your Seagate, Western Digital, PS4, or Buffalo external hard drive connected to the Windows or Mac computer, the device did not show up. The situation will erode your calmness especially when you have extremely important files in the unrecognized external hard drive. How to fix external hard drive not recognized? Don't worry, this article will provide you step-by-step instructions on how to get the problem settled.
You can try to connect the hard drive to another computer or connect it with other USB ports. If all the methods do not work, you can follow the article tutorial to fix the external hard drive not recognized on Windows or Mac computer, and you can recover lost data from an external hard drive with Recoverit Data Recovery.
If you want to solve your external hard drive not recognized on Windows 7, Windows 10 efficiently, it is advised that you conduct a problem diagnosis. Only when you know the specific reason why your external hard drive not showing up, can you settle it case by case. If you are not sure of the cause, just follow the guide to eliminate the causes one by one and get the issue done.
You might be plugging in the USB cable in a dead USB port. Unplug your external hard drive and plugin it into another USB port. Now, see if it is present there in the My Computer window. If not, follow step 2. 2b1af7f3a8